5 2 Wind Solar Hybrid Charge Controller

2 pages
156 views

Please download to get full document.

View again

of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Description
sun
Tags
Transcript
  VWG2008 wind & solar hybrid controller VWG2008 wind & solar hybrid controller can control PV cells and wind turbines charging battery with an intelligent charge mode. With the appearance of fine and operational running status lights, the controller is easy to operate. Have clear indications and accurately control battery to charge and discharge, with perfect protection. Controller core component adopt the United States srcinal micro-controller, control software using the German scenery complementary advanced control technology. Current limiting constant voltage type charge greatly extending the battery life. Controller has a high charging efficiency, low no-load loss, security, stability, reliability and long life. Has a very high cost performance. Main function   ü  precise control of digital and intelligent ü  keep the battery in the full state ü  prevent the battery overcharge ü  prevent the battery over discharge ü  prevent the battery reverse charge to PV cells ü  when the battery voltage reach to the setting, disconnect the charge circuit, automatically detect wind turbine output voltage at the same time, when the wind  generator output voltage is too high, the automatic braking of wind turbines ü  when the current is too large ,the controller is automatic protection and control of wind turbine braking ü  the wind turbine manual brake protection ü  if load current over the rated current, the controller automatically protected and locked  Load OverCurrent !   ü  Counting charging current hours and discharging current hours of the battery, counting wind turbine and PV cell power generation ü  According to the battery voltage automatically set the stop charging voltage, load off voltage, load recovery voltage, the braking current and braking time ü  Users could setup the Charge-on or off voltage, the load-off voltage, the Load-on voltage, braking current and braking time etc, according to their requirements ü  To prevent battery from over charging, Controller will automatically control the highest overcharge voltage of the battery , which is no higher than 15V (as per 12V battery) or 30V (as per 24V battery). Perfect protection   Reverse Polarity Protection for Battery Reverse Polarity Protection for Solar panels Protection from the lightning strike Protection for the load over-current Protection for the load short-cut Main parameters : MODEL VWG2008  Rated Power  600W (Best ration: wind turbine500W, PV cells100W)  Applicable batteries 12/24V,100-300Ah(automatic distinguish voltage) Wind turbine automatically braking voltage 17.5V/32.5V (DC voltage after rectification) Battery full charge cut 14.32V/28.64V(default ! adjustable) Battery low voltage disconnect load 10.98V/21.97V default ! adjustable #  Load on voltage 12.44V/28.88V(default ! adjustable) Charge current max 40A/20A Load current max 35.61A/17.80A  Recovery time after the automatic braking 10 Seconds default ! adjustable #  No load loss 40mA Dimensions 228 # 133 # 75mm Weight 1.2kg Working environment Environment temperature $ 10 %& +50 %! Relative humidity 0 & 90 '  
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks